• Totally enclosed, fan-cooled, 2-pole & 4-polestandard motors.
• Enclosure class: IP55
• Insulation class: F
• Voltage:
  3x220-240/380-415V
  1x220-240V
• Available with single-phase motors (0.37kW-2.2kW)

Pull-back design with seperated motor and pump body. The pump cover bracket acts as a connection between the motor and the pump body anddimentions accord to DIN 24255 and STD BS EN733 The flange size meets the requirements of PN16 in GB/T17241.6 or ISO7005-2/DIN2501

Pumping liquids which are thin, clean, nonflammable, non-combustible or non-explosive with no solid particles or fibres.

• Max. ambient temperature: +40 C
  
• Max. altitude above sea level: 1000m

The motors used for the measurements are based on 2900 rpm or 1450 rpm.

Tolerances to ISO 9906

Measurements have been made with airless water a temperature of 20 C

Curves apply to kinematic visosity of 1mm /s.

Select a best efficiency of the pump which is operatingwithin the bold curve of the pump performance.

• Normal temperature pump:15 C to 70 C
• Hot temperature pump:-15 C to 105 C

If the ambient temperature exceeds the 40 ̊C or the pump is installed at an altitude exceeding 1000 m, the motor output power P2 will decrease. In such cases, it is necessary to use a motor with a higer rated output.

• Normal pressure type: PN 16 bar
• High pressure type:PN 25 bar