SMD Monobloc Pump
Description
SMD,SMC series use stainless steel plate technology such as stamping, bulging and welding and pull-back design, for impeller, coupling and motor to be pulled out without connecting pump body and pipeline system. The SMD series is a one-piece design with an extended shaft connection for the motor while the SMC series is a rigid connection design for the standard motor.
Available Models
| Model | KW |
| SMD 50-32-200 | 3 KW |
| SMD 50-32-160 | 2.2 KW |
| SMD 50-32-160 | 1.5 KW |
| SMD 50-32-200 | 5.5 KW |
| SMD 50-32-200 | 4 KW |
| SMD 65-40-125 | 4 KW |
| SMD 65-40-200 | 7.5 KW |
| SMD 65-40-200 | 5.5 KW |
| SMD 65-40-200 | 11 KW |
| SMD 65-50-125 | 3 KW |
| SMD 65-50-200 | 7.5 KW |
| SMD 65-50-160 | 5.5 KW |
| SMD 65-50-125 | 4 KW |
| SMD 65-50-200 | 15 KW |
| SMD 65-50-200 | 11 KW |
| SMD 65-50-200 | 9.2 KW |
| SMD 65-50-200 | 18.5 KW |
| SMD 80-65-125 | 9.2 KW |
| SMD 80-65-125 | 7.5 KW |
| SMD 80-65-160 | 15 KW |
| SMD 80-65-160 | 11 KW |
| SMD 80-65-125 | 9.2 KW |
| SMD 80-65-200 | 22 KW |
| SMD 80-65-200 | 18.5 KW |
| SMD 80-65-200 | 18.5 KW |
Motor
- SMD: with non-standard special motor
- SMC: with totally enclosed, fan-cooled, 2-pole standard motors
- Enclosure class: IP55
- Insulation class: F
- Voltage:
3x220-240/380-415V
1x220-240V - Available with single-phase motors (0.37kW-2.2kW)
Pump Operating Conditions
Pumping liquids which are thin, clean, non-flammable, non-combustible or non-explosive liquids, not containing solid particles or fibers.
- Max. ambient temperature: +40 C
- Max. altitude above sea level: 1000m
Performance Curves
- The motors used for the measurements are based on 2900 rpm or 1450 rpm.
- Tolerances to ISO 9906
- Measurements have been made with airless water at a temperature of 20 C
- Curves apply to kinematic visosity of 1mm2 /s.
- Select a best efficiency of the pump which is operating within the bold curve of the pump performance.
Liquid Temperature
- Normal temperature pump: -15 C to +70 C
- Hot temperature pump: -15 C to +100 C
Ambient Temperature
If the ambient temperature exceeds the 40 ̊C or the pump is installed at an altitude exceeding 1000 m, the motor output power P2 will decrease. In such cases, it is necessary to use a motor with a higher rated output.
Contact
| | +27 (0) 12 819-1196 | |
| | +27 (0) 12 819-1137 | |
| | +27 (0) 12 819-1202 | |
| | +27 (0) 12 819-1249 | |
| | sales@teskpump.co.za | |
| | 44 Koedoe St, Koedoespoort Industrial, Pretoria, 0186 |