• Totally enclosed, fan-cooled, 2-pole & 4-polestandard motors.
  
• Enclosure class: IP55
  
• Insulation class: F
  
• Voltage:
  3-phase 220-240V
  3-phase 380-400V
  
• Single phase 220-240V (0.37kW-22kW)

Pull-up design with seperated motor and pump body. The pump cover bracket acts as a connection between the motor and the pump body, using the O-ring as a seal. The flange sizes meet the requirements of PN16 in GB/T17241 or ISO7005-2/DIN2501

Pumping liquids which are thin, clean, nonflammable, non-combustible or non-explosive with no solid particles or fibres.

• Max. ambient temperature: +40 C
  
• Max. altitude above sea level: 1000m

The motors used for the measurements are based on 2900rpm or 2950 rom.

Tolerances to ISO 9906

Measurements have been made with airless water a temperature of 20˚C

Curves apply to kinematic visosity of 1mm /s

Select a best efficiency of the pump which is operating within the bold curve of the pump performance.

• Normal temperature pump:-15˚C to 70˚C
  
• Hot temperature pump:-15˚C to 105˚C

If the ambient temperature exceeds the 40˚C or the pump is installed at an altitude exceeding 1000 m, the motor output power P2 will decrease. In such cases, it is necessary to use a motor with a higer rated

• Normal pressure type: PN12bar
  
• High pressure type:PN16bar